Rubber sheets
A wide range of rubber sheets, different types, sizes and hardness:
- both sides smooth
- one or both sides with textile pattern
- without ports – width from 1000mm to 1600mm
- with ports – width from 1300mm to 1600mm
- Sheet thickness from 0.5mm to 40mm
- rubber plates resistant to abrasion with or without CR layer
Application:
- cleaning of conveyor belts
- coating drums
- protection against mechanical damage
- protection against heat, vibration, noise and moisture
- electrical isolation and antistatic protection
Types of rubber sheets
Type Elastomer Characteristics Application
A NR - Natural rubber - Good flexibility
- Good physical and mechanical properties
- Resistant to solutions of acids and bases
- Lower thermal resistance
- It is not resistant to petrol and oilP40 orange red: food quality (FDA), BfR XXI, Cat. II / 1.4.2006
A35 black: anti-sticking dust
A40 red or gray: leaves no stains and seals
A65 black: non staining, abrasion-resistant (max. 120 mm3), smooth or with factory imprint
B SBR - Styrene butadiene rubber - Good heat resistance
- Good mechanical properties
- Resistant to solutions of acids and bases
- It is not resistant to petrol and oilB60-Y-W-WL black: abrasion resistant rubber
B67 black: antistatic (max. 5000 Ω)
B70 gray: for electrical isolation, 35kV and 50kV
C NBR - Acrylonitrile rubber - Good mechanical properties
- Resistant to vegetable and mineral oils
- Resistant to petrol containing up to 30% aromatics
- Low elasticity
- Smaller ozone resistanceC55 black: medium resistant to oil and grease
C60 blue: medium resistant to oil and lubricants + food quality (FDA)
C70 Black: resistant to oils and lubricants
Cl IIR IIR - butyl, Cl IIR - cyclobutyl rubber - Good heat resistance
- Good resistance to ozone
- Resistant to polar solvents
- Resistant to acids and bases
- It is not resistant to petrol and oilCl IIR45 Black: acid and heat resistant
D ili CR CR - chloroprene rubber - Good physical and mechanical properties
- Good resistance to ozone
- Resistant to aliphatic oils
- It is not resistant to petrolCR layer: it has very good adhesion properties (for coating drums or other rubber panels)
E EPDM - ethylene propylene rubber - Good heat resistance
- Good resistance to ozone
- Resistant to polar solventsE60 Black: resistance to ozone and heat, with or without EP port
Conveyor belts cleaners
Type Elastomer Hardness
(+/- 5 ShA)Elongation
(min. %)Tensile strength
(min. MPa)Abrasion
(max.mm3)Thickness (mm) Width (mm) Length (mm)
B60-Y SBR 60 450 17 120 Mar.40 1400 10 - 100
B55 SBR/NR 55 500 15 140 Mar.40 1400 10 - 100
B60-W SBR 62 400 17 80 (60) Mar.40 1400 10 - 100
A40 red NR 40 600 16 210 Mar.40 1200 - 1400 10 - 100
TR50 green NR/SBR 50 600 18 150 Mar.40 1400 10 - 100
B63-WL SBR 63 600 18 35 Mar.40 1400 10 - 100